Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Shear/ Shrubber fails
to start
Machine operates
intermittently
Motor runs but blades
remain stationary
Poor cutting
performance
Cause
1.Low battery pack charge.
2.Battery pack overheating.
1.Internal wiring damage.
2.On/off switch damage.
1.Internal fault.
1.Dull cutting blades.
2.Cutting blades have dents.
3. Too much friction due to lack of
lubricant.
Remedy
1.Charge the battery pack.
2. Wait for the battery pack to
cool down, at which point
the machine can be started
again.
1. Contact Authorized SKIL
Service Center or Service
Station.
1. Contact Authorized SKIL
Service Center or Service
Station.
1.Have blades sharpened
2.Have blades inspected
3.Lubricate blades
19
