Idiomas disponibles
Idiomas disponibles
Grill Head to Cart
4
IMPORTANT: Remove the tie wraps and packing material from the regulator hose, searing burner valve
and igniter wire. Pull the hose and igniter wire out to the right side of the grill head.
This step requires two people to lift and to position the grill head onto the cart.
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart. Open the lid and attach the head to the cart with(4) M6x13 screws and
M6 compression washers. (A & B)
Align the back rail holes with the holes on the side panels and the firebox. Attach the back rail with
(4) M4x10 screws. (C)
M6x13 Screw
Qty: 4 pcs
M6 Compression Washer
Qty: 4 pcs
M4x10 Screw
Qty: 4 pcs
A
C
B
22
