Question/Problem - Cause
Causa
The motor does not start:
• The battery is discharged
• ON/OFF switch electrical contacts are not in good
condition or it does not work
• Rotor or stator windings are damaged;
• Short-circuited rotor windings
•
The
motor
makes
intermittently or runs slowly:
• ON/OFF switch electrical contacts are damaged;
• Mechanical parts are blocked;
• The oscillating multi tool is running over excessive
pressure, overloaded motor;
Body overheats:
• Overloaded machine;
• Poor assembly of the housing or pieces inside the
oscillating multi tool;
;
;
;
an
abnormal
sound,
Solution
• Recharge or replace;
• Repair or replace the switch
• Call technical assistance;
• Call technical assistance
starts
• Repair or replace switch;
• Inspect the mechanical parts;
• Reduce the working pressure;
• Reduce working pressure;
• Check if there is any blockage;
;
;