Lanaform LA180105 Manual página 6

connection is encountering a problem.
In this case, take the plaid back to the
supplier or its after-sales department.
• If the temperature indicator displays
the letter "E", this means that the heat-
ing plaid is encountering a problem
again in the internal electronic circuit.
In this case, take the plaid back to the
supplier or its after-sales department.
Use of the plaid
To turn on the unit, first connect the switch to
the heating plaid by plugging the connector
and then insert the plug into a 220-volt pow-
er source.
Make sure the remote control is in the "ON" po-
sition (1). Two indicator lights "0" will appear
on the LED screen showing the heating inten-
sity and the timer mode (5) and (6) .
To heat the plaid as quickly as possible, we
recommend that you first set the thermostat
to High (4) with the button specifically pro-
vided for this purpose (4) and then decrease
it as you wish.
To avoid excessive heat emission, the inten-
sity of heat will be positioned at the minimum
intensity (L) after one hour of use at full power.
Adjustment of heating
intensity and length of use
The remote control allows the temperature to
be adjusted to 7 different levels of heat. To se-
lect the heating intensity, simply press repeat-
edly on the button "Temperature Set" (2) until
you reach the heat level you require.
Similarly, it is possible to set the length of use
of the plaid for a period ranging from one to
nine hours. To do this, press the "Time Set" (3)
button repeatedly to the time required.
E-IM-HeatingOverblanket-010-2023.indd 6 E-IM-HeatingOverblanket-010-2023.indd 6
Cleaning and
maintenance
When you are not using the heating plaid and
before cleaning it, observe the following in-
structions:
• Make quite sure the remote con-
trol is in the "OFF" position (1).
• Disconnect the power supply.
• Unplug the connector from the
blanket remote control.
• Leave the plaid to cool before cleaning.
Cleaning
Small stains can be cleaned with a cloth or a
damp sponge and, if necessary, with a little
liquid detergent for delicate fabrics.
The heating plaid should not be bent, dried
in a dryer or machine-pressed or ironed.
If the heating plaid is very dirty, it can be washed
in a washing machine. Set it on the program
for delicate fabrics at 40°C. Use a detergent
for delicate fabrics and dose according to the
manufacturer's instructions.
Do not wash the plaid too frequently to avoid
excessive wear and tear. The heating plaid
should not be washed in the washing machine
more than 5 times during its life.
When drying the heating plaid, do not hang
it with clothes pegs or other such devices. Do
not expose the heating plaid to heat sources
such as the sun, a radiator, etc.
Reconnect the switch to the heating plaid only
when the connector and the heating plaid are
completely dry.
Never switch the heating plaid on to dry it.
15-03-23 16:37:18 15-03-23 16:37:18