Idiomas disponibles
Idiomas disponibles
GETTING TO KNOW YOUR CLEANER
A. On/Off Pedal
B. Pre-motor Filter Cover
C. Bin Handle
D. Inner Bin Body
E. Bin Flap Release Button
F. Full Bin Mechanical Detector
G. Hose End Latch Button
H. Hose
I.
Bin Flap
J.
Outer Bin Body
K. Main Cleaner
L.
Dust Container
L1. Auger
L2. Fine dust tube (FDT) flap
M. Bin Release Latch
N. Pre-motor Filter Cover Latch
O. Display Panel*
P. Exhaust Filter Cover
Q. Hose Handle
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1.
Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release the hose: simply press the hose end latch button on the hose end and pull. [1]
2.
Connect the hose handle to the end of the extension tube upper [2a], or accessories
if required. [2b]
Connect the extension tube lower to the carpet or floor nozzle [3a] or accessories if
3.
required. [3b]
4.
The cleaning accessory tools can be stored after use on the underside of the extension
tube, using the accessory holder provided. [4]
USING YOUR CLEANER
Before using your cleaner, please note it has an electronic display panel which has
3 icons. (Certain Models do not have an electronic display panel, please refer to (e)*)
(a)
Power indicator, this will illuminate once cleaner is connected to the mains supply.
*Certain Models Only ** Certain models only, nozzles may vary according to model
R. Suction Regulator
S. Telescopic Tube
T. Carpet Nozzle (CA)**
T1. Hard Floor Nozzle (HF)**
T2. Carpet and Floor nozzle (GP)**
U. Pre-motor Filter
V. Exhaust Filter
W. Accessory Holder*
X. Accessory Set*
X1. Crevice Tool*
X2. Dusting Brush*
X3. Furniture Nozzle*
Y. Pet Hair Remover Mini Turbo Nozzle*
Z. Allergy Remover Mini Turbo Nozzle*
AA. Parquet Nozzle*
AB. Parquet Extra Nozzle*
AC. Bin Hook
(b)
Blocked compaction unit, this symbol will illuminate if there is debris in the
bin that is blocking the auger [L1] from rotating.
(c)
Bin full, this will illuminate when the bin has reached its maximum capacity
and needs to be emptied.
(d) All 3 icons will illuminate if there is no connection between the bin and main
body. Please remove and replace the bin ensuring it is positioned correctly.
(e)* If you hear an alarm sound, please check if:
- The bin is full.
- The bin if not fitted properly
- The auger is blocked
IMPORTANT: Each time the bin is removed from the main body, empty the bin and
ensure the FDT flap [L2] is free from hair and debris [9].
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [5]
2. Select nozzle most suitable for flooring type.
Please see Accessories section below for further guidance.
3. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [6]
3.1 Adjust the suction by moving the suction regulator on the hose handle to the desired level. [7]
4. Switch off the cleaner at the end of use by de-pressing the on/ off pedal. Unplug and
pull the power cord away from the cleaner body and release, this will enable the power
cord to return back inside the cleaner.
ACCESSORIES
To obtain the best performance and energy efficiency
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
2
GB
#1
it is recommended that the
