Idiomas disponibles
Idiomas disponibles
Please review adaptor pinouts in
•
connection to the 12-volt power supply. Non-compliance with this instruction or
connectivity may result in fire and/or risk of electric shock and/or damage the unit.
Ensure that the 12-volt power supply is off when connecting either 12-volt power
•
adaptor to the trailer. Non-compliance with this instruction or connectivity may result
in fire and/or electric shock and/or damage the unit.
When the WCS is streaming video, be careful not to touch the Wireless Camera as it
•
may be hot to touch. If you need to hold the Wireless Camera, hold it from the
bottom/battery compartment.
Do not expose to heat above +60 °C (+140 °F) or incinerate the Wireless Camera.
•
If exposed to direct sunlight, surfaces of the WCS camera may become hot.
•
Ensure USB cover is on correctly and screwed tight. Failure to do so may result in
•
water damage to the unit and/or fire and/or electric shock.
Wireless camera battery service can only be performed by a trained dealer
•
representative.
Only a genuine Toyota battery must be used with this Wireless Camera, use of any
•
other battery may present a risk of fire or explosion.
All fasteners should be tightened to their torque specifications.
•
The Wireless Camera will automatically stop charging after 20 hours.
•
Do not plug or disconnect 12-volt power while power source is on.
•
Do not tamper with the battery as this will void warranty.
•
Wireless Camera System
"Direct Power
Connection" and ensure proper
Owner's Manual | 6
