Stihl RE 80.0 Manual De Instrucciones página 42

English
► Press and release spray gun trigger several
times.
► Switch off pressure washer and unplug mains
plug from the socket.
► Detach spray gun, high-pressure hose and
water hose and allow antifreeze to run into the
container.
► Store and dispose of antifreeze in accordance
with the applicable regulations and in an envi‐
ronmentally responsible manner.
12 Transporting
12.1 Transporting the high-pressure
washer
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Empty or secure the detergent container so
that it cannot topple over, fall down and cannot
move.
Carry the high-pressure washer (RE 80.0 X)
► Carry the high-pressure washer using handle
(1).
Carry or pull the high-pressure washer (RE 80.0)
1
► Pull the high-pressure washer using handle
(1).
► Carry the high-pressure washer by the handle
(1) and the carrying handle (2).
Transporting the high-pressure washer in a vehi‐
cle
► Secure the high-pressure washer so that it
cannot turn over or move.
42
1
2
1
► If the high-pressure washer cannot be trans‐
ported in a frost-proof environment: Protect
the high-pressure washer using antifreeze.
13 Storing
13.1 Storing the pressure washer
► Switch off pressure washer and unplug mains
plug from the socket.
► The pressure washer should be stored in such
a way that the following conditions are fulfilled:
– The pressure washer is out of the reach of
children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed
room.
– The pressure washer is in a temperature
range above 0 °C.
– If the pressure washer cannot be protected
from frost in storage: Protect the pressure
washer with antifreeze.
14 Cleaning
14.1 Cleaning the high-pressure
washer and accessories
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Clean the high-pressure washer, high-pres‐
sure hose, spray gun and accessories with a
damp cloth.
► Clean the connectors and couplings on the
high-pressure washer, high-pressure hose and
spray gun with a damp cloth.
► Clean vents with a paintbrush.
14.2 Cleaning nozzle and spray
lance
► Rinse the nozzle and spray lance under run‐
ning water and dry with a cloth.
12 Transporting
0458-001-8721-B