Idiomas disponibles
Idiomas disponibles
ELECTRONIC CORDLESS TYING MACHINE
•
Don't use the equipment during rainy days.
•
After daily usage, it is suggested to disconnect the battery to the machine
and place them together in the toolbox.
•
According to the size of actual branches to be tied, adjust gear switch
with the buttons place on the tying machine, so as to achieve the best
branch-tying effect.
In case tying operation speed becomes slow, please check if battery
charge is used up.
The repair work and functions unmentioned in the instructions shall
be implemented by the Service Centre. To ensure safe usage, only
original parts can be used.
It is necessary to stop working when the residual thread has a
length of about 20 cm.
Remove the remaining thread and insert the new thread as shown below.
If the residual thread is not removed, there is a risk of locking and jamming
Open the front cover and remove the pressing plate.
www.kamikazevolpi.com
104
ELECTRONIC CORDLESS TYING MACHINE
Remove the remaining thread with the tweezers.
Insert the thread press carriage and place the front cover correctly. The tool
can now continue to work with the new thread.
14. CLEANING AND MAINTENANCE
Before to start any cleaning or maintenance operation, switch off the
machine and disconnect the battery to the machine. Place battery in
a safe package.
•
Cleaning and maintenance must be carried out regularly to ensure the
long-term and reliable operation of the equipment.
•
Don't spray water on the equipment or immerse it in water, otherwise the
equipment will be damaged.
•
Keep ventilating slot, engine chamber, and equipment handle clean. It
shall be cleaned with a wet cloth or a hair brush. Don't use any cleaning
agent; otherwise it may cause permanent damage to the equipment.
•
Each time after one roll of tying wire is used up, please use tweezers or
www.kamikazevolpi.com
105
