Idiomas disponibles
Idiomas disponibles
Function operation (ONLY by remote control)
1. Press "
", the product enter into working status. See below :A
2. Press "
" button for one time, the product works with low heating and display shows"--
/
" See below : B. Press again, changes to high heating and display shows"--/
below: C (figure 4)
3. The timer " " of remote control operate as same as the timer button on unit body.
4. Set current TIME/DAY (can set both under standby mode & working status):
Press "
" button for one time, the display shows "12" as default,press "
press "
" again, the display shows minute " 30", press "
"
" for third time, the display shows the day " ", press "
day: d1-d7) . Then press"
For example: Setting to Wednesday, 9:30 AM under 25 ºC under II heating, pls. refer to the fo-
llowing photos: Figure 5
Nota: - After the product is power off,it needs to be reset, then press "
time & day in turn;
5. Set temperature. During working status, Press"
Press "
/
" to set desired temperature (temperature range 10-49 ºC), press "
the setting.
Set weekly program(ONLY by remote control):
After complete setting of current TIME/DAY, below is the steps to set weekly program:
1) Press "
", the product enter into working status.
2) Press "
",the display shows "P", it enter into weekly program setting:See below :A
3) Press "
",the display shows d1~d7, set to working day(Monday-Sunday: d1~d7). Such as set
Monday: See below: B
Note: In order to distinguish between setting current day & working day:
Current day - Monday-Sunday: d1~d7
Working day - Monday-Sunday: d1~d7
4) Press "
", the display shows P1~P6(for each day, it can be set maximum 6 time periods).Such
as setting P1:See below :C
5) Press "
",the display shows 00"as default. Press "
Such as set the turn-on time 7:00am P1:See below :D (Memo: the setting time 0-24 for choice)
6) Press "
",the display shows the previous step turn-on time by default. Press "
nuously to set the turn-off time. Such as set the shutdown time at 13:00pm: (Note: turn-off time
later than turn-on time, when turn-on time same as turn-off time, the unit in stand by mode)
See below :E
7) Press "
/
" to setting the target temperature(Temperature range 10-49 ºC);
8) Repeat steps 3-7 above, you can set the whole weekly program. Then press"
9) To cancel the weekly function, press the "
gram is off. The product will revert to the previous function working status.
-Press"
/
",set working temperature under different time periods.
- The turn-on time periods 0~24hours, cannot set to minutes;
22
" to confirm the setting, the display will show previous settings.
/
" to set current minute ,then press
/
" to set current day (Monday-Sun-
/
",the display shows " 23 " as default.
" continuously to set the turn-on time.
" agian , the light "P" will go off. The weekly pro-
".See
/
" to set current hour;
" to check the current
" to confirm
" conti-
"to confirmed;
