Idiomas disponibles
Idiomas disponibles
_PuH
the bottom window sash down behind the
upper guide until they meet,
NOTE:
• Do not pull the window sash down so tightly that the
movement of sliders is restricted, Attach the cabinet
to the window inner sill by drMng the screws 0TEM F)
through the cabinet into window innersill.
• The c_inet should be installed with a very slight ti_t
downward by 1/4" from ]eve],
Window sash
_TEMF FIG, 10
_
Expand side curtains to fill opening.
Attach each side curt:_n to the window sash using 4
screws (_TEM G) (F_G, 1i)
• _nnect
a drain elbow of 9/16" inside diameter to
the drain pipe,
• _nnect
a drain hose of 9/16" inside diameter to the
drain elbow. (Drain hose is not supplied.)
Drain
pipe
FIG. 13
e_bow
eMbow
Drain
hose
_
Slide the air conditioner intothe cabinet. (FIG. 14)
CAUTION: For security purposes, reinstall side
screws that were removed in step I.
ITEM G
_]
Attach the window locking bracket (ITEM L) with
a screw (ITEM G). See FIG. 12.
ITEM G
FIG. 12
a]
DRAINAGE
A drain hole is provide, at the rear of the air
conditbner unit. Refer to the drain method below::
• Remove the hole wbber from the basepan.
_Cut
the, foam strip (_TEM K) to the proper _ength
and inse_ between the upper window sash and the
lower window sash.. (FIG. 15)
FiG. 15
_
Adjust the vent before the decorative front is
attached, (FIG, 16)
Straighten the lever, as shown. Pull down part @to
align with part C_
!'%ili
F_G, 16
-7=
