JENN-AIR JGC8430 Guia Del Usuario página 5

, If flame should go out during a cooking
operanon, turn the burner off. ff a
strong gas odor is detected, open a
window and wait five minutes before
relJghdngthe burner.
• Be sure all surface controls are set to
the OFF position prior to supplyinggas
to the cooktop.
° NEVER touch cooktop und] it has
cooled. Expect some parts of the
cooktop, espedaiiy around the burn°
ers, to aecome warm or hot during
coo]ring. Use potholders to protect
hands.
)URFA(:[: (}ONT_(
gg
Use to turn on the
surface burners. An
infinite choice of heat
settings is available
from Lo to Hi. Atthe
Hi setting a detent or
notch may be fek. The
knobs can be set on or between any of the
settings.
SETTING T: tE
Your cooktop has sealedgasburners with
automatic re-ignition. If the burner flame
shouldgo out, the systemwiii automatically
spark to re-ignite the burner.
1° Place a pan on the burner grate. (To
preserve the grate finish, do not oper-
ate the burners without a pan on the
grate to absorbthe heatfrom the burner
flame.)
2. Pushin knob andturn immediatelycoun-
terclockwise to the desired setting.
• A clicking (spark) sound will be heard
and the burner will light. (All ignitors
wiii spark when any surface burner
knob is turned on. However, only
the selected burner wiil light.)
[)[. RING A
m. Hold a lighted match to the desired
surface burner head.
2. Push in and turn the control knob slowly
to the desired setting.
*When lighting the surface burners, be
hold it in position before turn!ng the
The
automatic re,!gnido n feature wii]
n°t °perate during a powe r failure:
HgAs
SFIT:[:N(:;S ]
The size and type of cool<ware will affect the heat setting. For informaqon on cool<ware
and other factors affecting heat settings, refer to "Cooldng Made Simple" booklet.
Settings
Hi
I
@
ko
I
@
Uses
Use Hi to bring liquid to a boil, or reach pressure in a
pressure cooker. Always reduce setting to a lower heat when
liquids begin to boil or foods begin to cook.
An intermediate flame size is used to continue cooking. Food
wiii not cook any faster when a higher flame setting is used
than needed to maintain a gentle boil. Water boils at the same
temperature whether boiling gently or vigorously.
Use Lo to simmer foods, keep foods warm and reek
chocolate or butter.
Some cooking may take place on the Lo setting if the pan is
covered. It is possible to reduce the heat by rotating the knob
toward OFF. Be sure flame is stable.