Rack Mounting; Ac Mains Connection - QSC CX Serie Manual De Instrucciones

Rack Mounting

Optional handles shown. Use four screws and washers to mount the amplifier to the equipment rack rails. To use the amplifier outside a rack, attach
the self-adhesive rubber feet to the bottom.
EN
Cooling
Cool Air flows from the back of the rack, into the back of the amplifier, and out the front. This keeps the rack cool. The fan automatically runs faster
when the amp is working hard.
CAUTION!: Do not block the front or rear air vents!

AC Mains Connection

1. Turn off the AC power switch before connecting AC power.
2. Connect AC power to the IEC socket on the back of the amplifier.
NOTE: The AC Switch must be turned on to use remote control systems or the Standby function.
CAUTION!: The correct AC line voltage is shown on the serial number label, on the rear panel. Connecting to the wrong line
voltage may damage the amplifier or increase the risk of electric shock.
TD-000077-00-K
(Figure 3)
(Figure 3)
— Figure 3 —
— Figure 4 —
6