English
Owner´s manual
•
• Check the safety valve.
• The machine must not be used if any of the safety components are damaged.
• Use only original spare parts and accessories.
• Do not clean the machine and its parts with solvents, flammable or toxic materials.
• Clean the device only when it is switched off and cool.
• Clean the housing only with a soft, slightly damp cloth.
• Before servicing, clean the device of any hazardous substances that may have accumulated on it (due
to work processes). Avoid any skin contact with these substances. If the skin comes into contact with
hazardous dusts, it may cause severe dermatitis. If dust is generated or raised during maintenance work,
it can be inhaled.
• Always wear protective gloves and mask!
• Release the compressor pressure to avoid material damage. You can, for example, connect a compressed
air blow gun to the compressor and thus empty the pressure vessel.
• To protect it from dirt, the compressor must be covered after each use. The packaging can be used to
store the compressor.
• Do not cover the compressor until it has cooled down completely.
• Store the compressor and its instruction manual together. Store the machine and its accessories in a
dark, dry, dust-free and frost-free place.
Environmental protection
Take the machine to a clean point. Do not reuse components as spare parts as they may be damaged.
Ensure that parts such as cables and the like do not come into contact with the environment at the end of
their service life. The compressor must be disposed of in accordance with local regulations.
Waste electrical products should not be disposed of with normal household waste.
Recycle at appropriate facilities. Consult your local authority or retailer for recycling
advice.
Do not place packaging in ordinary garbage for disposal, be sure to recycle the
cardboard. Recycle unwanted materials instead of disposing of them as waste. All
tools, hoses and packaging should be sorted, taken to the local recycling center and
disposed of in an environmentally safe manner.
Air filter
Check that the air filter is clean. To service the filter:
1. Remove the filter housing cover.
2. Clean the foam or filter in hot soapy water. Rinse and allow to dry.
3. Replace the filter in the base of the housing and replace the cover.
ATTENTION: Replace air filters that cannot be cleaned. Paper filters cannot be washed.
28