STERWINS UP40 Instrucciones De Montaje, Utilización Y Mantenimiento página 192

FR
2.4 POWER TOOL USE AND CARE
A) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
ES
safer at the rate for which it was designed..
B) Do not use the power tool if the switch
does not turn it on and off. Any power tool
PT
that cannot be controlled with the switch
is dangerous and must be repaired.
C) Disconnect the plug from the power
source and/or remove the battery pack,
IT
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
EL
preventive safety measures reduce the risk
of starting the power tool accidentally.
D) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
PL
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
RU
2.5 BATTERY TOOL USE AND CARE
KZ
A) Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery
UA
pack may create a risk of fire when
used with another battery pack.
B) Use power tools only with
specifically designated battery packs.
RO
Use of any other battery packs may
create a risk of injury and fire.
C) When battery pack is not in use, keep
EN
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
D) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
E) Maintain power tools and accessories.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
F) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
G) Use the power tool, accessories and
tool bits etc. In accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
H) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
E) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
F) Do not expose a battery pack or
tool to fire or excessive temperature.
Exposure to fire or temperature above
130 °C may cause explosion.
G) Follow all charging instructions
and do not charge the battery pack or
tool outside the temperature range
specified in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire
192