Tricheck™ Mode; Taking Your Blood Pressure - A&D Medical UA-1030T Manual De Instrucciones

Ocultar thumbs Ver también para UA-1030T:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TRICHECK™ MODE
The UA-1030T blood pressure monitor has an optional feature to automatically
take three consecutive readings one minute apart and then provide you with the
average. This complies with the American Heart Association's recommended
measuring method.
1. After setting the year, month, day, hour and pressure, the next mode is the
TriCheck
Mode.
2. Default is off.
3. To turn on, use the arrow
4. To turn off again, use the arrow
5. After reaching the desired setting, press the clock
6. This will end your settings session.
7. To adjust any values, push the clock
E-11
buttons.
buttons.
button again.
button and begin again.
A&D Medical (Toll-Free): 1-888-726-9966
TIPS FOR BLOOD PRESSURE MONITORING:
Relax for several moments before measurement.
Do not smoke or ingest caffeine at least 30 minutes prior to measurement.
Remove constricting clothing and place cuff on bare arm.
Unless your physician recommends otherwise, use left arm to measure
pressure.
Do not talk during measurement.
Do not cross legs and keep your feet flat on floor during measurement.
NOW YOU ARE READY.
FOLLOW THESE SIMPLE STEPS:
1. Sit comfortably with your left arm resting on
a flat surface so that the center of your upper
arm is at the same height as your heart.
2. Lay left arm on the table, palm up and wrap
the cuff around the upper arm, about 0.5" (1-2
cm) above the inside of the elbow, as shown,
Place the cuff directly against the skin, as
clothing my cause a faint pulse, and result in
a measurement error.
3. Make sure cuff is aligned at heart level
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991

TAKING YOUR BLOOD PRESSURE

Cuff
0.5" or
1-2 cm
Air Hose
Artery position mark
At heart level
E-12
Tabla de contenido
loading

Este manual también es adecuado para:

Ua-1030tcn

Tabla de contenido