Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
FOR TECHNICAL ASSISTANCE, CALL: 908.355.7995
PROBLEM
Slow/no forward movement
Cleaner fails to climb
vertical walls gunite/
concrete pool
Cleaner climbs to water
surface and sucks air
CAUSES
Lack of/improper
water flow through
cleaner
Blockage of the Cleaner
throat
Worn shoes
Worn wings
Improper cleaner model
for application
Improper shoes for
application
Lack of/improper
water flow through
cleaner
Blockage of the Cleaner
throat
Worn shoes
Worn wings
Hose too short
Improper tension on
rear flap
Too much/improper water
flow through cleaner
Improper tension on
rear flap
Steering failure
SOLUTION
Check water flow with
Flow Gauge and adjust as
per Step 5
Clear blockage
Replace shoes
Replace wings
Call 908.335.7995
(U.S.A. only)
Call 908.335.7995
(U.S.A. only)
Check water flow with
Flow Gauge and adjust
as per Step 5
Clear blockage
Replace shoes
Replace wings
Install additional hose
sections per installation
instructions.
Turn rear flap adjuster to III
Check water flow with
Flow Gauge and adjust as
per Step 5
Turn rear flap adjuster to
position 1. If still climbing
too much, reduce water
flow until proper
operation is achieved.
1. Check and clean rear
screen
2. Check to see that cone
gear is free and rotates
smoothly in both
directions
3. Check medium
turbine and spindle
gear assemblies for
malfunction
21
