Idiomas disponibles
Idiomas disponibles
en-us
Switching on
1. Make sure that ice storage box is in its place and
locked into position.
2. Press the "Ice Maker On/OFF" button.
The corresponding button lamp lights up.
Before the ice maker is switched on again after a long
period, clean the ice cube maker and the ice storage
box.
When the ice maker is switched on, the temperature
for the freezer compartment automatically shown on
the display is 0° F (‐18 °C).
Notes on using the ice-maker
You will hear the sound of the motor after about two
hours. This is the sound of the valve providing water to
the ice maker and does not indicate a malfunction.
It is normal that several ice cubes may stick together
or get crushed.
Ice making takes longer if you open the drawer
frequently.
Switching off
Before switching the ice maker off, it is most important
that you switch the water supply to the appliance off
for a few hours.
1. Press the "Ice Maker On/OFF" button.
The corresponding button lamp goes out.
2. Taking out and cleaning the ice storage box.
3. Taking out and cleaning the ice cube box.
18
Water filter
A
2.
3.
1. Remove water filter B from box.
2. Attach A (cap) onto to B (filter) (refer to picture
above)
3. With A (cap) end facing you, insert the combined
A-B unit from Step 2 into housing C and rotate
clockwise (approximately ¾ turn) until it is locked
into place. Do not over-rotate.
4. We recommend changing the filter every 6 months.
When the filter has expired, turn knob
counterclockwise until is loose and pull straight out.
A small amount of water may drip out during the
transition so we recommend having a towel
available.
5. Remove cap A from old water filter and discard the
old filter.
6. Repeat steps 1-3 to install the new filter. Use a
permanent marker to write the filter change date on
the new filter.
2.
=
B
B
A
C
