Idiomas disponibles
Idiomas disponibles
4 Instructions for Use
Remove the cable tie and unravel the cordset before operation.
4.1 Head Tilt
The fan and motor assembly can be tilted up and down to your
desired angle.
To adjust the tilt angle, loosen both the larger "Tilt Adjustment
Knob" and the smaller "Tilt Range Knob" then tilt the head to the
desired angle and then tighten both knobs tight.
4.2 Fan On / Off / Speed
Rotate the knob located on the rear of the motor housing to position I for a low speed, 2
for a medium speed and 3 for a high speed.
Rotate the knob to position 0 to switch the Fan off.
4.3 Oscillation
Press the clutch knob down to activate the oscillating function. The fan head will swing
from side to side whilst blowing air.
To stop oscillation, allow the Fan head to move into the desired position and then pull
the clutch knob up.
8
