3 Assembly
Your Fan has been boxed unassembled to minimise packaging waste.
Each part is designed to fit together and be disassembled easily for cleaning or storage.
Start with the Base and Post as follows:
Remove the "Tilt Adjustment Knob" by unscrewing the knob and slide the "Tilt
Adjustment Bolt" out. Then remove the "Base Thumb Screw" and the "Base Washer" by
unscrewing as shown.
Take the Base, Base Thumb Screw, Base Washer and Post.
Fit the Post into the recess in the top of the Base and whilst holding it in place, turn over
to access the underneath.
Place the washer over the hole and then insert the "Base Thumb Screw".
Tighten securely, then turn the assembly the right way up and sit on a flat bench top.
5