SKB keypad
Default configuration
• Master code:
• Code length:
• Relays associated with opening:
• Time delay for relay number 1:
• Buzzer for relay number 1:
• Logic address:
• Anti-aggression mode:
• Wiegand mode:
• Relay mode:
• Backlighting:
• Buzzer:
This is the configuration used during the programming of opening codes.
Depending on your requirements, you will always be able to change it before
programming begins.
Master code
The
master
code
grants
authorisation
Depending on how the number of characters on your keypad is set up, it will be
used partially or in full. ("Code length" section)
For example, if you keep the default configuration of 5 characters, only the
first 5 digits of the master code will be required to access programming mode.
The default code "123456" can be changed. The new code:
•
must be 6 characters long
•
must contain both numbers and letters
Proceed as follows:
1. For the default setting, enter the first 5 characters of the
master code
2. Enter
3. Enter a 6 digit code (Example: 778899)
4. » Wait for the steady green LED to turn yellow
5. Exit programming mode
Code length
The default configuration requires the entry of codes with 5 characters,
including the master code. The length of the codes can be adjusted to a
minimum of 3 characters, up to a maximum of 6.
If this setting is changed, all opening codes programmed previously will
be deleted.
Proceed as follows:
3 DIGITS
4 DIGITS
1.
12345
12345
2.
B0
B0
3.
300000
400000
4.
» Wait for the steady green LED to turn yellow
5.
BB
BB
Programming opening codes (Default relay 1)
SKB by default assigns the characteristics listed in "Default configuration" to
the opening codes. (See above).
•
Codes starting with "B" cannot be programmed.
•
It is not possible to program an opening code which is the same as
the master code.
1. For the default setting, enter the first 5 characters of the
master code
2. Enter a valid opening code (Example: 55555)
3. Enter
4. » Wait for the steady green LED to turn yellow
5. Exit programming mode
You can speed this procedure up: once you have reached step 4, repeat
steps 2 to 5.
123456
5 characters
No. 1
5 seconds
off
001
off
off
internal
permanent
off
to
program
the
product.
12345
B4
(Code)
...
BB
5 DIGITS
6 DIGITS
12345
12345
B0
B0
500000
600000
BB
BB
12345
(Code)
B
...
BB
Choosing the relay
SKB by default links the opening codes to relay 1; to change this setting,
proceed as follows:
RELAY 1
1.
12345
2.
B5
3.
10
4.
» Wait for the steady green LED to turn yellow
5.
(Code)
6.
B
7.
» Wait for the steady green LED to turn yellow
8.
BB
Relay opening time
The relay timer is set by default to 05 seconds. The time period can be adjusted
to a minimum of 01 seconds, up to a maximum of 99.
To change this setting, proceed as illustrated by the examples:
RELAY 1, 1 SEC.
1.
12345
2.
B1
3.
010
4.
» Wait for the steady green LED to turn yellow
5.
BB
Deleting opening codes
Deleting individual codes
1. For the default setting, enter the first 5 characters of the
master code
2. Enter the code you wish to delete
3. Enter
4. » Wait for the steady green LED to turn yellow
5. Exit programming mode
If you want to delete several codes, you can speed this procedure up: once
you have reached step 4, repeat steps 2 to 5.
Delete all
1. For the default setting, enter only 5 characters of the
master code
2. Enter
3. » Wait for the steady green LED to turn yellow
4. Exit programming mode
Restoring the default configuration
If you are changing default parameters, it will always be possible to restore
them.
Restoring the factory setting does not delete the opening codes you
have already programmed. However, if the previous configuration specified
a number of characters other than 5, all the opening codes programmed
previously will be deleted.
1. For the default setting, enter the first 5 characters of the
master code
3. Enter
4. » Wait for the steady green LED to turn yellow
5. Exit programming mode
Full instructions: pro.comelitgroup.com > SKB > Manuals
RELAY 2
RELAYS 1 and 2
12345
12345
B5
B5
20
30
(Code)
(Code)
B
B
BB
BB
RELAY 2, 99 SEC.
12345
B2
Time
990
BB
12345
(Code)
12345
12345
BA0BAB
A
...
BB
B0A
...
BB
...
BB
7
