Idiomas disponibles
Idiomas disponibles
-
Remove the adapter from the core of the old brush
bristles aligned in the same direction.
-
Fit the new brush and make sure that the adapter
is coupled to the drive hub.
-
Replace the brush compartment cover, repeating
the disassembly operations in reverse order.
Adjusting the side brushes for wear
! ATTENTION: before carrying out the operations
apply the parking brake.
due to excessive wear, they can be adjusted as follows:
-
Lower the side brushes by pulling the relative
levers out and easing them down.
-
Loosen the adjustment screws on the brush motor
support.
-
Position the brush by hand, as required.
-
Tighten the adjustment screws.
EN
26
