Idiomas disponibles
Idiomas disponibles
CAUSE
I
CORRECTION
PROBLEM
I
SOUNDANDNOISE(Con_
Popping or cracking sound
when compressor comes on.
• Metal parts undergo expansion
and contraction,
as in hot water
pipes.
• This is normal. Sound will level off or disappear as
freezer continues to run.
Bubbling or gurgling sound,
• Refrigerant (used to cool
• This is normal
like water boiling,
freezer) is circulating
throughout the system.
Vibrating
or rattling
noise.
Level the unit. Refer to "Leveling" in the First Steps
Section.
Freezer is not level. It rocks on
the floor when it is moved
slightly.
Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.
Freezer is touching the wall.
Ensure floor can adequately support freezer. Level the
freezer by putting wood or metal shims under part of the
freezer.
Relevel the freezer or move freezer slightly. Refer to
"Leveling" in the First Steps Section.
WATER/MOISTURE/FROST
INSIDE
FREEZER
Moisture forms on inside
freezer walls.
i Weather is hot and humid,
i
which increases internal rate of
frost build-up.
Door may not be seating
properly.
Door is kept open too long, or
is opened too frequently.
This is normal
See "DOOR PROBLEMS" Section.
Open the door less often.
WATER/MOISTURE/FROST
OUTSIDE FREEZER
Moisture forms on ouside of
freezer.
• Door may not be seating
properly, causing the cold air
from inside the freezer to meet
warm moist air from outside.
• See "DOOR PROBLEMS" Section.
ODOR IN FREEZER
Odors in freezer
interior needs to be cleaned.
• Clean interior with sponge, warm water, and baking
Foods with strong odors are in
• soda.
the freezer.
Cover the food tightly.
DOOR PROBLEMS
Door will not close.
Freezer is not level. It rocks on
the floor when it is moved
slightly.
Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.
This condition can force the cabinet out of square and
misalign the door. Refer to "Leveling" in the First Steps
Section.
Level the floor by using wood or metal shims under the
freezer or brace floor supporting the freezer.
LIGHT BULB IS NOT ON
Light bulb is not on.
i Light bulb is burned out.
• Follow directions under "interior Light" in the Freezer
Features Section.
No electric current is reaching
See "FREEZER DOES NOT RUN" Section.
the freezer.
AUTOMATIC ICE MAKER NOT WORKING
Automatic ice maker not
working. (some models)
_
nsure the Wire Signal Arm is not in the UP position.
ice maker should produce 4 to 5 pounds of ice in a 24 hour period.
Water supply is turned off.
Water pressure is too low.
The freezer is not cold enough.
