Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION FOR THE MODELS
24
GOL / VOYAGE / SAVEIRO (G6 - G7)
This example of installati on is valid for GOL G6 / G7 models,
for more informati on and schemati cs of other brands
and models, access the link: www.stetsom.com.br/en/
instaladores or from QR code:
CENTRAL LOCATED ABOVE THE FUSE BOX
RESISTOR
180Ω 1/4W
(brown/red)
* It is necessary to remove the 73-way
connector from the module and separate
it in order to see the numbering of the
pins in the connector as shown in the
image.
It is essenti al that you use a multi meter to test electrical current. STETSOM is not
responsible in any way for damages caused to the electric system of the vehicle, since
there are constant changes in the original electric system of the vehicle including
locati on and color of wires.
24
PIN 36
(brown/
red)
red/black
green/black
Ground
+12V
THE RELAY IS ONLY NECESSARY FOR THE
MODELS MADE IN 2015 OR BEFORE.
Use 220 Ohms resistor if you have
trouble fi nding 180 Ohms.
180Ω
220Ω
Brown
Red
Gray
Black
Brown
Brown
Golden
Golden
ALARM SPECIFICATIONS
25
Alarm Module
Operati ng Voltage
Consumpti on
Lock
Output Signal (Sound, Auxiliary, Lock e Etc)
Remote Control
Ba� ery
Frequency of Operati on
All parts of this product, including electrical and electronic components, must be recycled or
reused and should not be disposed of as household waste. Look for recycle points for these
materials and do your part to protect the environment.
Note: All parts of this product, including electrical and electronic components, must be recycled or reused and
should not be disposed of as household waste. Look for recycle points for these materials and do your part to
protect the environment.
Any updates made to this manual will be available for consumers to consult without any charge on the
brand's site. It is recommended that the updated manual be consulted whenever necessary.
Images contained in this manual are merely illustrati ve and may diff er from the actual product.
9 ~ 16 V
10 mA ~ 18 mA
Up to 10A
200 mA
CR2032 (3V)
433,92 MHz
25
Tabla de contenido
