INSTRUCCIONES DEL PANEL DE CONTROL
Water
4
• In the initial status of power-on, if there is no water in the drum, Fuzzy function is valid, the
water level is not set, and the display is "--", the program is Normal (The Fuzzy function is also
valid if select "Deep Wash" program by mode button). If there is water in the drum, Fuzzy
function is invalid, the water level is default "7". The Fuzzy function is invalid when select other
programs, and the digital lights shows the remaining time of the corresponding mode.
• In stand-by status, press "Water Level" to choose water level, digital light show 1-10 level,
then fuzzy function is cancelled.
• In washing(including rinsing) process, Long press Water level to add water supply, loose to
stop supply. Or after press Start/Pause, pressWater level to choose a higher water level. If the
new setted level is lower than curent level, the new level will come into force when next water
supply.
• Automatic water replenishment: in the process of "washing" and "rinsing", if the washing
machine detects that the water level is lower than the setted water level, the washing machine
will pause, and the automatic water replenishment continues to the set water level.
Rinse
5
• Press Rinse to choose the rinse times, digital light shows 1-4.
• When adjusting the rinse times, press rinse one times, it is the current rinse times. Press
again to adjust. If not press, the digital light will show the remining wahsing time or delay time
after 3 seconds.
• When program get to rinse or spin status, we can not press Rinse to adjust tine rinse times.
Spin
6
• Press Spin to adjust the spin time, digital shows 2-10.
• When adjusting the spin time, press one times, it is the current spin time. Press again to
adjust. If not press, the digital light will show the remining wahsing time or delay time after 3
seconds.
• In standby mode, press the Spin button for 3 seconds to directly enter into the Spinning
program.
Play/Pause
7
Short press Start/Pause to start or pause.
