SICK GRTE18V Instrucciones De Uso página 22

OPERATING INSTRUCTIONS
en
5.1 Notes on UL approval
6 Commissioning
6.1 Alignment
22 O P E R A T I N G I N S T R U C T I O N S | GRTE18(S)V
Table 2: DC
PNP: Q (≤ 100 mA)
NPN: Q (≤ 100 mA)
PNP: Q (≤ 100 mA)
NPN: Q (≤ 100 mA)
UL: Only for use in applications in accordance with NFPA 79. These devices shall be
protected by a 1 A fuse suitable for 30 V DC.
Adapters listed by UL with connection cables are available.
Enclosure type 1.
Align the sensor with the object. Select the position so that the red emitted light beam
hits the center of the object. You must ensure that the optical opening (front screen) of
the sensor is completely clear
Align the sensor with the object. Select the position so that the infrared light (not
visible) hits the center of the object. The correct alignment can only be detected via
the LED indicators. See figure 2
(front screen) of the sensor is completely clear.
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
[see figure 2].
and table 2. You must ensure that the optical opening
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
8021181.1HT2/2023-02-13 | SICK
Subject to change without notice