Replacement
Bobbins
Only use bobbins purchased through Sears Stores, stock No.
6870 or Sears Service Centers, Parts No. 102869107.
Bobbin Winding
• Removing
bobbin
case
Remove the extension table from the machine by pulling it to
the left. Open the shuttle cover _t_by pulling down the
embossed part on the left of the cover.
Raise the needle to its highest
position
by rotating
the
handwheel toward you.
_1_Shuttle cover
Bobbin case
To remove the bobbin case _from
the shuttle, pull open the
latch of the bobbin case. Pull the bobbin case straight out of
the shuttle.
J
• Bobbin
winding
[]
Release the clutch by pulling out the handwheeL This
wilt stop the needle from moving while you wind the
bobbin.
[]
[]
Draw thread from spool.
[]
Guide the thread around the thread guide.
[]
Thread through the hole in the bobbin from the inside to
the outside.
[]
Put the bobbin on the bobbin winder spindle.
[]
[]
[]
22
