Hitachi Koki M 12V2 Instrucciones De Manejo página 9

ROUTER SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
parts of the power tool "live" and shock the
operator.
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input*
Collet Chuck Capacity
No-load speed
Main Body Stroke
Weight (without cord and
standard accessories)
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Straight Guide ....................................................... 1
(2) Bar Holder .............................................................. 1
Guide Bar ............................................................... 2
Feed Screw ............................................................ 1
Wing Bolt ............................................................... 1
(3) Dust Guide ............................................................. 1
(4) Dust Guide Adapter .............................................. 1
(5) Template Guide ..................................................... 1
(6) Template Guide Adapter ..................................... 1
(7) Centering Gauge ................................................... 1
(8) Knob ........................................................................ 1
(9) Wrench .................................................................... 1
(10) 8mm or 1/4" Collet Chuck .................................. 1
(11) Wing Bolt (A) ........................................................ 4
(12) Lock Spring ............................................................ 2
Standard accessories are subject to change without
notice.
OPTIONAL ACCESORIES - sold separately
(1) Template Guide
A
16.5 mm 18 mm
18.5 mm 20 mm
25.5 mm 27 mm
28.5 mm 30 mm
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
8000 – 22000 min
Bottom of Sub
base
B C
4.5 mm
2. Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the
body leaves it unstable and may lead to loss of
control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped firmly during
operation.
4. The bit is very hot immediately after operation.
Avoid bare hand contact with the bit for any
reason.
M12V2
2000 W
12 mm or 1/2"
–1
65 mm
6.3 kg
(2) Chuck Sleeve
20 mm
D
6 mm
12 mm
3 / 8"
3 / 8"
1 / 2"
10 mm
(3) Trimmer Guide (Fig. 20)
(4) Template Guide Adapter (B)
For the product of Trend.
Optional accessories are subject to change without notice.
APPLICATIONS
Woodworking jobs centered on grooving and
chamfering.
M12SA2
1700 W
22000 min
6.2 kg
d Shape of chuck sleeve
English
–1
No groove
1 groove
2 grooves
No groove
8