Zwilling FRESH & SAVE Manual De Instrucciones página 16

EN
1
Charging the vacuum pump
To maintain optimal battery function, charge at least once every
3 to 6 months.
Charge the vacuum pump fully before the first use. Place the pump in the
charging station. Insert the small USB connector (USB-C) into the port at
the charging station. Insert the larger USB connector (USB 2.0 type A)
into a power adapter* and plug it into a wall socket. If liquid has been
sucked in, the vacuum pump must not be placed in the charging station
uncleaned. You can also connect the charging cable to the USB port of
a computer. During charging, the indicator light will flash slowly. When
the pump is fully charged, the indicator light will continuously glow.
Charging can take 2 to 5 hours.
2
Vacuum sealing of boxes and bags
Place the vacuum pump on the valve of the box/the bag and press
down lightly. Press the ON/OFF button on the pump. The pump sucks
the air out of the box. The vacuum sealing stops automatically when the
vacuum pressure reaches the right level. The vacuum sealing can also
be manually stopped at any time by pressing the ON/OFF button.
Clean the vacuum boxes before using them for the first time.
Before each use, make sure that the seal of the lid and the edge
of the box are clean and dry.
16
Do not overfill the box. Always leave
0.39 - 0.79 in free to the edge. The
indicator line serves as a guide here.
Make sure the food inside the box does
not come in contact with the valve on
the inside of the lid.
The opening of the bag has to be completely clean and dry.
Ensure that the valve inside the bag remains clear and does not
come into contact with its contents. The pump must not absorb
any liquids (e.g. water, oil, meat juices). The built-in liquid sensor
stops the pump when liquid is sucked in towards the pump. Dry
the pump thoroughly before continuing the vacuum process.
1.
* Power supply unit specifications can be found in the technical data.
Use
2.