English; Introduction - Siei QUIX.-2M-0004 Manual De Instrucciones

ENGLISH

ENGLISH ENGLISH ENGLISH ENGLISH

Introduction

The QUIXDrive Inverters allow an efficient and flexible control of motor speed. In this way, the
asynchronous motor can be used in a wider range of applications.
The modern control systems allow a significant reduction of noise compared to the older inverters.
The QuixDrive is made of two different models:
- QUIXDrive_F
- QUIXDrive_V
Noise disappearance:
The noiseless operation of the inverter is due to a proper method of creating the waveform of the voltage that supplies
the motor.
Continuity of operation in power failure state:
In case of temporary power failure, the QUIXDrive inverter stops and starts again, and keeps the preset control
characteristics without having to stop the motor.
Easy operation with the extractable keypad:
The functioning interface is made of a panel consisting of four keys, one display with four 7-segment digits and three
leds.
The display and the keys allow you to change all the inverter parameters so as to make it suitable to all applications.
The display also shows the controlled values, e.g. frequency or current, and the error codes in case of improper
operation.
Serial connection:
Besides being controlled from panel, the QUIXDrive inverter can be easily remote controlled and programmed through
serial connection by means of a proper communication protocol.
However, the run, stop, speed reversal and change operations are performed, as usual, through terminal board.
The QUIXDrive_V inverter supplies high torques at low revolution numbers without discontinuity thanks to the current
automatic control. It assures a safe start of the motor.
single-phase and 3-phases, simple speed controller
single-phase and 3-phases, with a torque vector control
—————— QUIXDrive Inverter ——————
INTRODUCTION
1-GB