Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Output and Controls
MAIN OUT
10
It has two RCA connectors and one
P10 connector. This output carries
the mixed signals from all the
channels.
The 60mm sliding (MAIN LEVEL)
allows you to adjust the overall
volume (L+R) which will be sent to
the console's outputs (AUX OUT
and MAIN OUT).
AUX OUT
11
It has two RCA type connectors
and one P10. This output contains
mixed signals from all channels.
It has rotary control (AUX LEVEL),
in which it is possible to adjust the
level of signal that will be sent to
the output AUX OUT.
This output also has the phase
adjustment (AUX PHASE) that
allows to make of variable form the
rotation of the phase of the signal
of 0 to 180º.
VU
12
You can monitor the signal strength
of the MAIN OUT output by
watching the LEDs.
16
10
11
12
10
Power Supply
+12V
13
Positive
Power:
Connect
RED wire (central terminal of
the connector) from the power
harness to the Battery's POSITIVE
POLE (+12V) using a 1mm² (17
AWG) wire. The STM 0803 has an
internal resettable thermal fuse.
GND
14
Negative/Ground: Connect the BLACK wire (external terminal of
the connector) from the power harness to the Battery's NEGATIVE
POLE (-), using 1mm² (17 AWG) wire.
REM IN
15
Input for Remote Turn On: The RED wire (center terminal of the
connector) from the remote wire harness can be connected to
the remote output of a CD/MP3 Player using a 20 AWG cable, or
through a on/off switch in the +12V.
REM OUT
16
Output for Remote Turn On: The BLACK wire (outer terminal of
the connector) of the remote wire harness can be used to power
other sound systems from the remote turn on. Use a 20 AWG
cable.
LED POWER
17
The LED (blue) indicates that the
STM 0803 is on.
the
15 16
14 13
17
17
Tabla de contenido
