Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRESENTATION
Inputs and Controls
MIC and LINE
1
Balanced input with XLR (Cannon)
and P10 connector, ideal for
connecting dynamic microphones.
This inputs does not supply +48V
Phantom Power to condenser type
microphones, which in turn only
work with this power.
LINE
2
Unbalanced inputs with P10 (TRS
1/4") and RCA connectors, designed
to receive high-level signals such
as CD/DVD/MP3 player, musical
instruments, preamps, and other
sound equipment.
Note: The balanced inputs is present on channel 1, the
other input channels (2 and 3) are unbalanced. The MIC
(XLR) and LINE (P10) inputs of all channels can receive
balanced or unbalanced signals.
14
1
2
Inputs and Controls
GAIN
3
This control allows you to adjust the
console's input gain. The Red LED
(CLIP) indicates signal saturation.
HIGH
4
With this control it is possible to
boost or attenuate by ±15dB the
high frequencies of the audio
signal.
MID HIGH
5
With this control it is possible to
boost or attenuate by ±15dB the
mid-high frequencies of the audio
signal.
MID LOW
6
With this control it is possible to
boost or attenuate by ±15dB the
mid-low frequencies of the audio
signal.
LOW
7
With this control it is possible to boost or attenuate by ±15dB the
low frequencies of the audio signal.
MUTE
8
With this switch it is possible to enable or disable the channel
signal without having to adjust the channel's audio level. When
pressed, the Red Led (CLIP) will remain accessible.
LEVEL CHANNELS
9
With this control it is possible to adjust the signal level that will go
from the channel to the main output (MAIN).
3
4
5
6
7
8
9
15
Tabla de contenido
