Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Troubleshooti ng
• Place the ground wire for the sound mixer as close as possible
to the grounding of other audio equipment used together;
• Do not loop the ground wire. Avoid using multi ple grounds. If
possible, use a star connecti on where all the grounds run from a
single point.
Protecti ons
Short Circuit (Resett able Thermal Fuse): Input 12V/Remote Output
Polarity Inversion: Input 12V/Remote Input
Technical Specifi cati ons
Resp. Freq. (-3dB):
T.H.D:
Signal to Noise Rati o (SNR):
Sensiti vity of input
channel 1:
Sensiti vity of input
channels 2 and 3:
4 Equalizati on
bands per channel:
Impedance of input
channel 1:
Impedance of input
channels 2 and 3
Impedance of outputs:
Maximum level of outputs:
20
1Hz ~ 75Khz
<0,01% (T.H.D.)
110dB
Mic (XLR) Min: 840mV ~ Max 14mV
Line (P10) Min: 1,8V ~ Max 26mV
Line (P10/RCA) Min: 1,9V ~ Max: 45mV
Low ±15dB (80Hz)
Mid Low ±15dB (500Hz)
Mid High ±15dB (3K5Hz)
High ±15dB (12KHz)
Mic (XRL): Unbalanced 4KOhms
Balanced 8KOhms
Line (P10): Unbalanced 8,5KOhms
Balanced 17KOhms
Line (P10): Unbalanced 95KOhms
Line (RCA): Unbalanced 95KOhms
Main Out (P10/RCA): 47R
Aux Out (P10/RCA): 47R
Main Out (P10/RCA): 16 dBu/4,9Vac
Aux Out (P10/RCA): 16 dBu/4,9Vac
Technical Specifi cati ons
Power Supply Voltage (POWER Connector):
Maximum Consumpti on:
Remote Input (REM Connector):
Remote Output (REM Connector):
Dimensions (H x W x L):
Weight:
9 ~ 16 Vdc
250 mA
9 ~ 16 Vdc
350 mA
46,5 x 151 x 199,5 mm
700 g
21
Tabla de contenido
