Cameo ZENIT W300 TW Manual De Usuario página 16

STANDALONE AUTO MODE (Auto program 1-6)
The 6 different auto programs each comprise non-editable colour-change sequences. Bright-
ness and speed are independently adjustable. Press MODE to access the main menu (--- Menu
---). Using UP and DOWN, select the menu item Stand Alone, confirm with ENTER, then select
the submenu item Auto and confirm again with ENTER. Now use UP and DOWN to select one of
the 6 auto programs (observe arrow) and confirm with ENTER. To adjust brightness, use UP and
DOWN to select the menu item Dim and confirm with ENTER, then use UP and DOWN to select
the desired value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the
menu item Speed, confirm with ENTER, and then select the desired value between 001 and 100.
Confirm with ENTER.
STANDALONE STATIC MODE (Static)
Static mode allows the Dimmer, Strobe and RGBW functions to be adjusted directly on the device
with values between 000 to 255, similar to a DMX control unit. In this way, an individual scene
can be created without an additional DMX controller. Press MODE to access the main menu (---
Menu ---). Using UP and DOWN, select the menu item Stand Alone and confirm with ENTER,
then select Static and confirm once again with ENTER. Now use UP and DOWN to select the
menu item you wish to edit (observe arrow) and confirm with ENTER. The display will now show
a three-digit number field, and you can use UP and DOWN to configure the desired value between
000 and 255. Confirm all entries with ENTER.
STANDALONE MODE CCT
The colour temperature mode enables you to configure the colour temperature from cold white
16