Cameo ZENIT W300 TW Manual De Usuario página 13

UP and DOWN
Select individual menu items in the main menu (DMX address, operating mode etc.) and in the
submenus. Allow changes to the status or value in a menu item, such as the DMX address, as
required.
NOTE:
1. Before navigating the control menu, make sure that the control panel is dry and
clean so that its functionality is not impaired.
2. Moisture on the control panel can lead to incorrect operation of the spotlight, e.g.
in outdoor conditions. Activate the lock function after configuration to prevent
malfunction due to moisture (Settings -> Autolock -> On).
7 W-DMX ANTENNA
™
Antenna for W-DMX control.
™
PRESSURE EQUALISATION ELEMENT
The pressure compensation element to prevent the forming of condensation inside the housing
is located in the base of the device behind the cable feed to the LED unit. In order to ensure its
proper function, the element must be protected from dirt.
HOUSING FAN
The 2 housing fans and heat sink are located on the rear of the LED unit. In order to ensure suffi-
cient air circulation, do not cover the device and clean it regularly.
PLEASE NOTE
• As soon as the spotlight is connected, the following are displayed in succession: „Welcome to
Cameo", the model name and the software version. During the start-up process, the previously
set operating mode is activated and the spotlight is ready for operation after a short time.
• If one of the DMX operating modes is activated and there is no DMX signal to the DMX input,
the currently programmed DMX address is displayed and the characters on the display will
begin to flash.
• Press MODE to go up one level in the menu structure. To go to the main display in the menu
structure, press MODE repeatedly.
• The main display is activated automatically if there is no input in the space of approximately
one minute.
• Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu
structure that allows direct access to previously selected menu items and submenu items.
1. Press MODE and ENTER simultaneously for direct access to the last-edited submenu item,
where you can make changes instantly as required (DMX starting address and all modes).
13