Idiomas disponibles
Idiomas disponibles
USER MANUAL
Eliminating minor faults yourself
The unit has been checked several times during production for proper functioning. However, if any functional
or operational faults should occur, first check the unit according to the following list.
Troubleshooting tips
Fault and failure
The unit does not work
Odours from the interior
The engine runs constantly
A layer of frost forms in the interior
The temperature in the unit is too warm The doors may have been opened too
24
MDRS619FIE46 (BCD460 wifi说明书).indd 24
Possible causes
Not connected to the power supply
Power cable or plug defective
Other electrical defect of the product
Fuse is switched off or defective
Ambient temperature too low
Power failure
Interior is contaminated
Some food, containers or packaging
cause odours
It is normal to hear the engine noise.
The engine must run more often for the
following reasons:
•
The temperature is set colder than
necessary.
•
A large amount of warm food has
been stored in the appliance.
•
The ambient temperature is too
high.
•
The doors have been open too long
or have been opened too often.
•
After commissioning or when the
appliance has been switched off for
a long time.
The air outlets are covered; insufficient
ventilation; door not closed properly.
long or too often; or the doors may have
been held open by some obstruction; or
the unit may have been placed with in-
sufficient clearance at the sides, bottom
or top.
Solution approach
Connect to the power supply
Have checked by a specialist
Have checked by a specialist
Check fuse, replace if necessary
Try to solve the problem by lowering the
set temperature.
Check the power supply
Clean the interior
Make sure that the air outlets are not
covered by food and that the food is
placed in the appliance in such a way that
sufficient ventilation is ensured. Check
that the door is properly closed.
Do not open doors unnecessarily or
longer than necessary; Check clearance
around the appliance.
2022-1-11 10:57:23
