Idiomas disponibles
Idiomas disponibles
Before the first use
AT TEN TIO N!
Risk of damage!
Improper handling of the device can lead
to damage.
Set up device
The ambient temperature affects the power
consumption and proper functioning of the
device. Therefore, the device should be placed in
a well-ventilated and dry room with an ambient
temperature corresponding to the climate class
for which the device is designed.
Do not place the device outdoors (e.g. balcony,
terrace, garden shed, etc.).
MDRS619FIE46 (BCD460 wifi说明书).indd 9
The packaging must be undamaged. Check the device for transport
damage. Do not connect a damaged device under any circumstances. In
case of damage, please contact the supplier.
Remove transport cover
The unit and parts of the interior are protected for transport. You can
remove all adhesive tapes on the right and left side of the device door as
well as any adhesive residues with cleaning solvent. Remove all adhesive
tapes and packaging parts from the interior of the device as well.
After transport, the device should stand for 12 hours to allow the co-
olant to collect in the compressor. Non-observance could damage the
compressor and thus lead to failure of the device. The warranty claim
expires in this case.
Do not use sharp knives or pointed objects
when opening the device.
Please observe the notes on page 13 when set-
ting up: "Tips for energy saving"
Remove the device doors
If the unit does not fit through the apartment
door,the unit doors can be unscrewed.
Attention!
The unscrewing of the unit doors may only be
carried out by the customer service.
AT T E NT I ON!
Risk of damage!
All illustrations without guarantee.
Technical changes reserved
EN
9
2022-1-11 10:57:04
