Idiomas disponibles
Idiomas disponibles
3. Connect the Supply for Reverse Osmosis Connections
Filtration Unit Filtered Water Outlet
Faucet Inlet Hose
NOTE: A 3/8" x 1/4" union (not included) may be required depending on the iltration system used.
Cut the end of the faucet supply hose and remove the nut. Verify that the cut end is straight and burr free.
Push the supply hose completely into the filtration unit. Verify that the supply connection is secure.
Route the waste line (red) to the Reverse Osmosis system waste connection without any loops or low spots. Verify that
the waste connection is secure.
Route the drain line (black) from the faucet to the drain saddle connection or drain line adapter. Cut the waste line and
route to avoid any loops or low spots. Verify that the drain connection is secure.
Remove the rubber plug from the back of the faucet.
Check all connections for leaks.
Kohler Co.
5
Rubber Plug
1534735-2-A
