Idiomas disponibles
Idiomas disponibles
Ree ase aioe b e n n o
sora Meee
PSA
TE
Tuning to Preset Stations
© Press PRESET W cr & (or PREV I or NEXT Pi
on the remote control) to select the desired
preset number.
—
The preset number, frequency and waveband
appear on the display.
@ Record Tape
1 As soon as you press @ RECORD, the current
sound will be recorded on TAPE 2, provided a
tape suitable for recording is loaded.
2 To stop recording, press ml {or STOP ml on the
remote control).
Receiving RDS radio station @
RDS (Radio Data System] is a broadcasting service
that allows FM stations to send additional
information along with the regular FM radio signal.
This additional information can contain:
¢ STATION NAME : The station name is
displayed.
¢ FREQUENCY : The frequency of the station is
displayed.
* PROGRAM TYPE : The following program types
exist and can be received by your tuner: News,
Affairs, Info, Sport, Educate, Drama, Culiure,
Science, Varied, Pop M, Rock M, M.O.R.
(middle of the road music}, Light M, Classics,
Other M, No type.
@ RADIO TEXT (RT) : Text messages appear in the
display.
26
E E E
voR ECE OE ee a
re
TU
CRO NEO
RENEE
n
nono
ann hesn we
When
you have tuned to an RDS station, the RDS
logo (8) and the station name will appear on the
display:
¢ The display normally shows the radio station
name Poa.
By repeatedly pressing RDS MODE you can
change the type of display information:
— The display shows in turn: STATION NAME ~
FREQUENCY
-> PROGRAM
TYPE -> RADIO
TEXT -> STATION NAME.
Note : When you press the RDS MODE button and
the display shows "NO FDS", it indicates that either
the tuned station is not transmitting RDS signal or it
is a non RDS station.
RDS Clock
Some RDS station may be transmitting a real time
clock at an interval of every minute.
_ Setting the time with RDS clock:
Press TIMER ©.
Press SET CLOCK.
"BO-28" starts flashing.
Press the RDS MODE button.
If the station does not transmit RDS time or if the
RDS button is pressed before the clock time
transmission, the- message "NO RBS CLOCK"
appears.
—
When the RDS clock is read, the message
"RERDING RDS CLOCK" appears.
When the RDS clock time appears;
1 Press SET CLOCK once to confirm and store the |
new time.
e if you do not wish to store the RDS clock time,
do not
press the SET CLOCK, the previous set
time will be retained.
iotn«
