Kenmore Elite 125.16651900 Manual De Uso Y Cuidado página 4

Idiomas disponibles

Idiomas disponibles

FOR OUTDOOR USE ONLY.DO NOT
operate indoors or in an enclosed area
such as a garage, shed or breezeway.
Useyour grill OUTDOORSin a well
ventilated space awayfrom dwellings or
other buildings to prevent dangers
associated with gas accumulation and toxic
vapors.Although minimum clearanceis
36 inches (91 cm), we strongly recommend
that you do not operate this appliance within
10
ft. (3.0 m) of any structure, combustible
material or extra LP gas cylinders not
attached to the appliance. Not adhering to
these clearances will prevent proper
ventilation and may increase the risk of a fire
and/or property damage, which could also
result in personal injury.
Maintain a minimum clearance of
36 inches (91 cm) between all sides
of grill, deck railings, walls or other
combustible
material. DO NOT use grill
under overhead unprotected
combustible
construction.
• LP GAS CYLINDER (NOT SUPPLIED WITH
THIS GRILL).
• The LP cylinder is available for purchase at the
same location the grill was purchased
The LP (Liquid Propane) gas cylinder
specifically
designed
to be used with this grill
must have a 20 lb. (9.1 kg) capacity
incorporating
a Type 1 cylinder valve and an
over-filling
protection
device (OPD).
This grill is designed
to fit Worthington,
Manchester
or SMPC brand 20 lb. (9.1 kg)
cylinders.
Other brand DOT cylinders
may fit
this grill if the cylinder
has similar dimensions
of the top and bottom rings.
DO NOT connect this grill to an existing #510
POL cylinder valve with Left Hand threads. The
Type 1 valve can be identified with the large
external threads on the valve outlet.
DO NOT connect to a propane cylinder
exceeding
this capacity.
DO NOT connect to a cylinder that uses any
other type of valve connection
device.
INSTALLATION INFORMATION:
The installation
of this appliance
must be in
accordance
with:
All applicable
local codes, or in the absence
of
local codes, either:
National Fuel Gas Code - ANSI-Z223.1
NFPA 54
Natural Gas and Propane Installation
Code:
CAN/CGA
B149.1
Propane Installation
Code: CAN/CGA
B149.2
(Canada)
To check your local codes, see your local LP gas
dealer. This appliance
is adjusted and shipped for use
with LP gas. If an external electrical
source is utilized,
it must be electrically
grounded
in accordance
with
local codes, or in the absence
of local codes, with the
National Electrical
Code, ANSI/NFPA
70, or the
Canadian
Electrical
Code, CSA 22.1 and a minimum
15 amp supply is needed.
Stainless Steel Wire
Warming Rack
Stainless Steel
Cooking
4 Stainless Steel
Burners
Smoker Burner
7,500 BTUs
Stainless Steel
Side Burner
3
loading