Idiomas disponibles
Idiomas disponibles
SAFETY
•
If operating a power tool in a damp location is unavoidable, use a
RESIDUAL CURRENT DEVICE (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal Safety
•
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
•
Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes, hard
hat or hearing protection used appropriately will reduce personal injuries.
•
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/or battery and when picking
up or carrying the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch on invites accidents.
•
Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
•
Do not over-reach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
•
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust related hazards.
•
Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
Power Tool Use and Care
•
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
•
Disconnect the plug from the power source and/or remove the
battery, from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
8
DPB-2500
99922238003
© 01/2023 ECHO Incorporated
