Idiomas disponibles
Idiomas disponibles
Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and informa-
tion completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these opera-
ting instructions on to the new owner.
1. Explanation of warning symbols and notes
D This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
» This symbol is used to indicate additional information or
important notes.
2. Package contents:
- TV wall bracket
- Installation kit (see contents, Fig. 1)
- These operating instructions
> Please check that the installation kit is complete before
installing the bracket and ensure that none of the parts
are faulty or damaged.
3. Safety instructions
For proper installation, please have this bracket fitted by a
qualified specialist.
If the wall on which the television is to be mounted is made
of other types of material than those specified, you should buy
appropriate installation material from a specialised dealer.
Also observe the safety clearance around the TV unit (depends
on the model).
The bracket may not be mounted above locations where per-
sons might linger.
Once you have mounted the bracket and the flat panel display,
check that they are sufficiently secure and safe to use.
You should repeat this check at regular intervals (at least every
three months).
In case of damage, remove the TV and do not continue to use
the holder.
Ensure that no electrical cables and connections are crushed or
damaged during installation or adjusting.
Do not place loads on the bracket that are heavier than the
load-bearing capacity specified and do not exceed the speci-
fied maximum screen size.
* Ensure that the bracket is loaded symmetrically. During adjust-
ment, ensure that the bracket is loaded symmetrically and that
the maximum weight is not exceeded.
4. Intended use and specifications
* The bracket is used for wall mounting flat panel displays for
non-commercial, private household use.
* The bracket is only intended for use within buildings.
* Use the bracket only for the intended purpose.
Maximum load bearing
capacity:
ці
Screen size:
58,0 - 127,0 cm (US: 23" - 50")
Depth:
2,6 — 38,5 cm
Angle:
-12? (depends on the device)
Up to 180? at 3 hinges with 2
double carrier arms (depends on
the device)
Pivoting range:
Wall mounting plate
dimensions:
u
according to the VESA standard
until 400x400
Maximum load bearing
Mounting holes:
capacity:
эш
Screen size:
94,0 - 165,0 cm (US: 37" - 65")
Depth:
2,6 — 44,0 cm
Angle:
-12? (depends on the device)
Up to 180? at 3 hinges with 2
double carrier arms (depends on
the device)
Pivoting range:
Wall mounting plate
dimensions:
52,0 x 23,2 cm
according to the VESA standard
Mounting holes:
until 700x500
00108756
57 58 59man
cs de el en es fi fr hu it nl pl pt ro ru KE
trinaa
6
26.03.12
16:44
