Reer PI M30 NF K Manual De Instrucciones Original página 34

Test pulse interval T (repetition pulse package)
9.4 LED display
LED Operating status
Signal No voltage supply
Power
Signal Undervoltage
Power
Overvoltage
Signal
Sensor fault
Power
(→ 11 Troubleshooting)
Signal a) Operating mode:
Power damping element at safe
switch-off distance from the
sensor (> 30 mm)
b) Setting aid:
damping element in the
enable zone
Signal Setting aid:
Power damping element in the
enable zone or in the
immediate vicinity of the
enable zone
Signal Operating mode:
Power damping element in the
enable zone
14
Outputs
Both outputs switched off
Both outputs switched off
One output or both
outputs switched off
Both outputs switched off
Both outputs switched off
Both outputs enabled
min� 30 ms
max� 50 ms
A1 A2
(OSSD) (OSSD)
0 0
0 0
0 0
0 1
1 0
0 0
0 0
0 0
1 1