Idiomas disponibles
Idiomas disponibles
2_
Follow the steps below to attach the grass catcher:
a.
Lift rear discharge
door. See Fig. 3-6.
Figure 3-6
b.
Place grass catcher on the pivot rod. Let go of
discharge
door so that it rests on the grass catcher.
To remove
grass catcher, lift rear discharge
door on the mower.
Lift grass catcher up and out, off of the pivot rod. Release rear
discharge
door to allow it to close rear opening
of mower.
WARNING:
Never operate
mower
unless the hooks
on the grass catcher are firmly seated on the pivot
rod and the rear discharge
door rests firmly against
top of the grass catcher.
Adjustments
Each wheel has a height adjustment
lever to change the cutting
height
of the mower.
1.
Depress height adjustment
lever towards
wheel.
2.
Slide lever to desired
position
for a change in cutting
height.
See Fig. 3-7.
\
\
Figure 3-7
J
3.
Release lever towards
deck.
IMPORTANT:All
wheels must be placed
in the same
relative
position.
For rough or uneven lawns, move the
height adjustment
lever to a higher position.
This will stop
scalping of grass.
Gasand Oil Fill-Up
Refer to the Engine Operation
section
in this manual for
additional
engine
information.
1.
Add oil provided
before starting unitforthe
firsttimeoutofthe
box.
2_
Service the engine
with gasoline as instructed
in the Engine
Operation
section
of this manual.
WARNING:
Use extreme
care when handling
gasoline. Gasoline
is extremely
flammable
and the
vapors are explosive.
Never fuel the machine
indoors or while the engine
is hot or running.
Extinguish
cigarettes,
cigars, pipes and other
sources of ignition.
SECTION
3 -- ASSEMBLY&
SET-UP
