Hoover Enhanced Clean Serie Manual Del Propietário página 7

FILLING SOLUTION TANK
• Solution tank is located in hoselhandle
assembly. Place Hose!Handle Assembly on
flat surface. Unscrew the solution tank cap (A)
by turning counter- clockwise (4,3), and insert
funnel,
•
Fill the tank with recommended HooveP Multi-
Purpose Disinfectant or HooveP Multi-Purpose
Cleaner using funnel and measuring cup
(4.4), maximum solution volume 200ml
(6.5oz) as indicated on measuring cup,
• If refilling solution tank during use, do not hold
or depress tdgger, as steam may be released.
Trigger can be locked to avoid accidental
release of steam.
Re-install the solution tank cap in a clockwise
direction and tighten until completely sealed.
Adjust clean control dial by turning the dial to
the desired setting, which will automaticaBy
dispense the solution when pressing the
trigger. Turn to the "off' position if no Hoover _
solution is desired
STEAM TRIGGER LOCK
ACTIVATION
•
If used, steam trigger ]ock will lock steam
trigger in %ff = mode, To activate lock, slide
toward tdgger.
OPERATING THE CLEANER
• Attach hose/handle assembly as directed in
F{gure 3.1 (pg. 6).
• Plug {n the appliance to a grounded outlet.
• Press the power button (4,5,D). The blue power
indicator light should {lluminate. If the light does
not illuminate, check the "troubteshoeting" section
for more details.
• The steam cleaner should take between 3"5
minutes to heat up to steam temperatures, which
will be indicated when the green "steam ready"
indicator illuminates.
• Attach the desired acoessoP/, following the
instructions inthe section"AccessoryAttachment
and Use,"
• Press steam tdgger (F).
= By tuming steam control knob (G) in a counter-
clockwise direction, the steam flow released
decre_;ses (4.7). To increase, turn it in the
oppos;te direction.