3. If a short circuit occurs this may activate the
internal circuit on the power pack (H). Press the
circuit breaker to reset the power pack (H).
CARE AND MAINTENANCE
Circuit
breaker
• Before attempting to clean the fixture, disconnect the power to the fixture by turning the
breaker off and removing the fuse from the fuse box.
• To clean the fixture, use a dry or slightly dampened clean cloth.
• DO NOT use any cleaners with chemicals, solvents or harsh abrasives as damage to the fixture
may occur.
• Bulb replacement: (12) 4-watt, 12-volt wedge-base bulbs required (sold separately).
• DO NOT touch new bulb with bare hands as oil from skin may damage the lamp and cause short
bulb life.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The transformer is not connected
The light does not
into power receptacle.
turn on at night.
2. The bulb is broken.
3. The contact pins of connector do
not pierce well.
9
1. Connect the transformer into
power receptacle.
2. Replace with new bulb.
3. Make sure the contact pins pierce
wire well and touch the electric wire.
Lowes. co m/po rtfol io