Idiomas disponibles
Idiomas disponibles
For your safety
Connecting parts of the power cord must be splash-
proof and made of rubber or covered with rubber.
Before using the unit, always check whether the
power cord is damaged, brittle or tangled.
To do this, switch off the unit and pull out the mains
plug.
Use only a power cord which is in perfect condition.
Before using the appliance,
- whether the grass catcher works and the deflector
closes correctly. Replace damaged, worn out or
missing parts immediately.
- check for any wearing or damage to the cutters,
fastening pins, and the whole cutter unit. Have
worn or damaged parts replaced by a specialist
company and only in sets to exclude imbalances.
- whether the power cord is damaged between the
motor and switch/plug combination. Immediately
have a damaged power cord replaced by a spe-
cialist company.
Spare parts and accessories must satisfy the
requirements specified by the manufacturer.
Therefore only use original spare parts and original
accessories or spare parts and accessories that
have been authorised by the manufacturer.
Always observe the installation instructions supplied
with the parts during replacement. The use of spare
parts or accessories not approved by the manufac-
turer can represent a significant safety risk.
Repairs may only be carried out by a specialist
workshop.
When working with the mower
When working with or on the appliance you must
wear protective clothing. This includes:
- Non-slip safety shoes
- trousers,
- tightly fitting clothing,
- Protective goggles.
Operate the mower only in the technical condition
stipulated and delivered by the manufacturer.
Before carrying out any work on this
mower
To prevent injury before performing any work on the
device (e.g. maintenance and adjustments)
- Switch off the motor,
- Wait until all rotating parts have come to a stand-
still,
- pull out the mains plug,
- allow the motor to cool down (approx. 30 min-
utes).
After working with the device
Before leaving the appliance, always pull out the
mains plug.
Safety equipment
Fig. 1
Danger
Never use an appliance if it has damaged
safety devices or if there are no safety devic-
es fitted.
Safety lever (1)
The operator presence control is for your safety to
immediately switch off the motor and cutter deck in
an emergency.
There must be no attempt to circumvent this func-
tion, which is crucial for your personal safety.
Ejection flap (2) or impact protection (3)
The ejection flap/impact protection protects you
from being injured by the blade or by ejected solid
objects.
The appliance must always be operated with the
ejection flap or impact protection.
Symbols on the unit
On the device you will find various symbols on adhe-
sive labels. Here is an explanation of the symbols:
Caution! Before switching on, read the
operating instructions!
Keep third parties out of the danger
area!
Keep connection cable away from the
cutters!
Never put your hands and/or feet in
the vicinity of rotating parts.
EN
9
