Yamaha SRT-700 Manual De Instrucciones página 13

Playing back audio from a Bluetooth device on the
unit
1
With the unit turned on, press the BLUETOOTH key on the unit's
remote control to select Bluetooth as the input source.
The BLUETOOTH indicator on the front panel flashes.
Flashes
2
Turn on the Bluetooth function of the device and then connect.
When connection is made correctly, the BLUETOOTH indicator of the
unit lights up.
Lights up
3
Play back a song on the device.
NOTE
• Perform connection with the device and unit within 10 meters (33 ft) of each other.
• It may be necessary to select "SRT-700 Yamaha" in the
connection problem occurs. You may have to change the output setting to output audio to the unit,
depending on the device you are using.
• Adjust the volume level of the device as required.
• If a device is already connected to the unit, terminate that
with the new device.
Terminating Bluetooth connection
connection is terminated in the following cases. When the
is terminated with the unit turned on, the BLUETOOTH indicator changes from the lit
status to the flashing status and the unit enters the connection wait status.
• The Bluetooth function is turned off on the compatible device.
• The BLUETOOTH key on the unit's remote control is pressed for more than 3
seconds.
• The unit is turned off.
Using the Bluetooth standby mode
The
with the operation of the
1
Using the HOME THEATER CONTROLLER application
device list again, in the event that a
By installing the dedicated free application "HOME THEATER CONTROLLER" to a
connection, then connect
conveniently with the
sound adjustments)
NOTE
connection
• To use the application, connect the unit and a
• If you enable the
For details on "HOME THEATER CONTROLLER", see the product information on our
website.
standby mode allows you to turn on (or off) the unit automatically, linked
device.
With the unit turned on, hold down the BLUETOOTH STANDBY key
on the unit's remote control for more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
When the standby mode is enabled and the unit is turned off, the
indicator lights up in red (Bluetooth standby).
Lights up (red)
Functions available on Bluetooth devices with Bluetooth standby mode enabled
Power on interlock function (when the unit is turned off)
When connection is made on the device, the unit will turn on and will be ready to play back
sound from the device.
Power off interlock function (when the unit is turned on)
The unit will be turned off when connection is terminated on a
BLUETOOTH is selected as the input source.)
device, such as a smartphone, you can perform various operations easily and
device. (Setting items: basic operation, surround mode,
standby mode of the unit, you can turn on the power of the unit with the
device.
Flash 3 times (enabled), flash once (disabled)
device. (Only when
device via connection.
D
En
11