Makita US053D Manual De Instrucciones página 15

1. Remove the battery prior to adding chemical liquid to the tank.
2. Hold the tank rmly and rotate it anti-clockwise so as to separate the motor housing rom the tank. Reer to Figure 7.
3. Unscrew and remove the measuring cup.
4. Measure the recommended liquid. The cup can be used to measure up to 50 ml (2 oz) of liquid. Refer to Figure 8.
5. Careully pour the liquid into the tank with measuring cup through the lling opening o the tank. You can also
dissolve chemical liquid in water completely in a separate container and then pour it into the tank. Make sure you
always pour chemical liquid into the tank through the lling opening o the tank rather than small opening which is or
measuring cup storage. Make sure that the tank lling strainer is in place. Reer to Figure 9.
6. Rinse the measuring cup with clean water.
7. Ret the cup, making sure it is tightened securely.
8. Insert the hose into the depressed part o the tank lling strainer. Reer to Figure 10.
9. Reattach the motor housing to the tank and rotate it clockwise to "Click". Refer to Figure 11.
*Container is not included.
Figure 7
Figure 9
Figure 11
Figure 8
Figure 10
15 English