Watts LF007 Serie Manual De Instalación Y Mantenimiento

Watts LF007 Serie Manual De Instalación Y Mantenimiento

Conjunto de válvulas de doble retención, 2 1/2' (6.35 cm) - 3' (7.62 cm)
Ocultar thumbs Ver también para LF007 Serie:
Idiomas disponibles

Idiomas disponibles

Installation, Maintenance, and Repair Manual
Series LF007
Double Check Valve Assembly
2½" – 3"
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
WARNING
!
Local building or plumbing codes may require modifications
to the information provided. You are required to consult the
local building and plumbing codes prior to installation. If the
information provided here is not consistent with local building
or plumbing codes, the local codes should be followed.
This product must be installed by a licensed contractor in
accordance with local codes and ordinances.
WARNING
!
Need for Periodic Inspection/Maintenance: This product
must be tested periodically in compliance with local codes, but
at least once per year or more as service conditions warrant.
All products must be retested once maintenance has been
performed. Corrosive water conditions and/or unauthorized
adjustments or repair could render the product ineffective for the
service intended. Regular checking and cleaning of the product's
internal and external components helps assure maximum life and
proper product function.
NOTICE
For Australia and New Zealand, line strainers should be installed
between the upstream shutoff valve and the inlet of the backflow
preventer.
Watts product specifications in U.S. customary units and metric
are approximate and are provided for reference only. For precise
measurements, contact Watts Technical Service. Watts reserves
the right to change or modify product design, construction, speci-
fications, or materials without prior notice and without incurring
any obligation to make such changes and modifications on Watts
products previously or subsequently sold.
Testing
For field testing procedure, refer to the Watts installation sheets
IS-TK-DL, IS-TK-9A, IS-TK-99E and IS-TK-99D at
www.watts.com.
For technical assistance, contact your local Watts representative.
LF007-NRS-IOT
Series LF007 large-diameter backflow preventer is designed for
installation at referenced cross-connections to prevent the backflow
of polluted water into the potable water supply. Series LF007 Model IOT
includes factory-installed pressure sensors.
NOTICE
An add-on monitoring connection kit is required to collect psi
measurements from the integrated pressure sensors. Without the
connection kit, the pressure sensors are passive components
that do not communicate with any other device. For BMS only.
(The connection kit and pressure sensors are also available for
existing installations. For ordering details, see "Add-on Monitoring
Connection Kits."
NOTICE
Use of integrated pressure sensors and monitoring connection
kit with Model IOT does not remove the need to comply with all
required instructions, codes, and regulations related to installation,
operation, and maintenance of the backflow preventer.
Watts is not responsible for data transmission failures due to
connectivity issues, power outages, or improper installation.
RP/IS-LF007L
Tabla de contenido
loading

Resumen de contenidos para Watts LF007 Serie

  • Página 9 únicamente como referencia. Para conocer las dimensiones exactas, póngase en contacto con el Servicio Técnico de Watts. Watts se reserva el derecho de cambiar o modificar el diseño, la fabricación, las especificaciones o los materiales del producto, sin previo aviso y sin incurrir en ninguna obligación de hacer dichos cambios y modificaciones en los productos de Watts que se hayan vendido antes o después del cambio o...
  • Página 10: Edificio Exterior Sobre El Suelo

    Edificio exterior sobre el suelo Disponibles en aluminio o fibra de vidrio. Para obtener más información, consulte ES-WB en watts.com. En un área donde no se producen condiciones de congelación, la serie LF007 puede instalarse en el exterior de un edificio. (Consulte la Figura 2.) La instalación más satisfactoria se realiza sobre el...
  • Página 11: Mantenimiento De Las Válvulas De Retención

    Mantenimiento de las válvulas de retención No se necesitan herramientas especiales para realizar el mantenimiento del conjunto. 1. Retire los pernos y la cubierta. 2. Retire el retenedor del orificio del cuerpo. Ahora los módulos de la válvula de retención se pueden retirar de la válvula a mano Junta Topes/ Conjunto de...
  • Página 12 Garantía limitada: Watts Regulator Co. (la “Compañía”) garantiza que cada producto está libre de defectos en el material y la mano de obra cuando se usen de forma normal en un período de un año a partir de la fecha de envío original. En caso de que tales defectos se presenten dentro del período de garantía, la Empresa, a su criterio, reemplazará o reacondicionará el producto sin cargo alguno.

Tabla de contenido