Zwilling 36801-000 Manual De Instrucciones página 47

Troubleshooting
Troubleshooting
Problem
The pump stops
during the vacuum The pump sucked in liquids
sealing process during the vacuum sealing
and does not turn process.
back on.
www.zwilling.com
Possible cause Remedy
Do not turn the pump upside down.
Shake the pump slightly to remove any
liquid. Make sure the pump and the
charging station are completely dry.
Plug the pump into the charging station
for one second to reset, then remove it
and push the On/Off button. Addi-
tional liquids may drip out. Repeat this
process if the pump stops again.
GB
47